My house is a constant work in progress. There isn't a room in it that does not need something done to it, walls painted, wallpaper removed, cabinets stained, chandelier replaced, floor replaced and the list goes on (and on). Bub and I just tackle one project at a time.
I was reading Bower Power and her post on painting her front door, when it dawned on me the front of our house needed something.
Yes, we are a house divided. War Eagle. |
Once we finalized our decision on which red, we got right down to business. First thing, Bub took the door off the hinges using a Flathead screwdriver and a hammer. He put the tip of the screwdriver at the top of the hinge and tapped the handle with the hammer causing the pin to come out of the hinge.
Our door is original to this 1985 home and when we started really looking at it, it was easy to see that this would not be its first paint job. First thing Bub removed the caulk around the leaded glass window.
and then off came the door handles- yes, handles. I don't know nor do I understand but, the door has two handles. All there is to taking the handles off is unscrewing the screws on the side of the door.
And then, Bub started sanding. He didn't sand all the way down to the metal of the door- he just sanded it a bit so that the primer would be able to gain traction. It was at this point that we came to the conclusion that if we were going to the trouble of painting the door, it would still look like crud if we didn't clean between the leaded glass pane and the door window.
So, Bub removed the trim and carefully took off the leaded glass pane and put it on the floor in our living room.
After the door was sanded, we wiped the door down with TSP- just to get it clean before the primer goes on. |
Next, we taped up the door with painter's tape and plastic to protect it from red paint accidents on the window pane.
I used Rustoleum Primer in red.
And I used Glidden Exterior Flat paint in Red Delicious.
While I was getting busy priming and painting, But got busy replacing the weatherstrip on the backside edge of the leaded glass pane.
This is the weatherstrip that we used. |
We laid the leaded glass pane back on top and replaced the trim, which was only a matter screwing screws back into the previously made holes.
The trim needed to be caulked. You run the caulk bead along the edge and then use your finger to flatten it out. When ever I do this with my finger, it always reminds me of running my finger around the edge of a layered cake to get a taste of the icing- random, I know.
And the trim needed to be painted too. I was a bit hesitant because my cutting in skills are not amazing but, had I known Bub's trick, I would not have hesitated. He just used a piece of thick paper to protect the leaded glass pane.
We replaced the handles and hung the door back up in the hinges, with a little help from our neighbor.
And wadda you know! Our front door pops! Bub and I both love it.
Congrats for a job well done! White looks good, but red looks much better. With some help, you managed to pull through your door project successfully. Are you planning any other home improvements soon?
ReplyDelete